See the “Taking your text to new heights” section, earlier in this chapter, for information. If you’re adding text in model space, remember to use the scaled AutoCAD text height, not the plotted text height.
The command line prompt for the opposite corner of the mText rectangle reappears:
Specify opposite corner or
[Height/Justify/Line spacing/Rotation/Style/Width]:
6. If you want to change justification from the default (top left), type J, press Enter, and choose one of the other justification options.
Look up “multiline text, aligning, Justify Multline Text” in the index of the online help system if you want an explanation of the other justification options.
7. Pick another point in the drawing.
Don’t worry about the height of the rectangle that you create by choosing the second point; the width of the rectangle is all that matters. AutoCAD adjusts the height of the text rectangle to accommodate the number of lines of word-wrapped text. Don’t worry too much about the width, either; you can adjust it later.
The Multiline Text Editor frameless window appears with the tab and indent ruler above it and the Text Formatting toolbar above that, as shown in Figure 9-3.

Figure 9-3: Adding multiline text.
If you want to see multiline text at its final height as you type it, zoom to a reasonable resolution before you start the mText command. If the text would be very small (because you’re zoomed way out) or very large (because you’re zoomed way in), AutoCAD temporarily adjusts the size of the text in the frameless editor to show what you’re typing. When you finish entering the text (as in Step 11), AutoCAD places it in the drawing at the height that you specified.
8. Verify the text font and height.
The text font and height should be right if you correctly performed Steps 1, 4, and 5. If not, you can change these settings in the Font dropdown list and the Font Height edit box in the Text Formatting toolbar.
9. Type text into the text area of the dialog box.
AutoCAD word wraps multiline text automatically. If you want to force a line break at a particular location, press Enter.
10. If you want other formatting, select text, right-click, and select the appropriate option from the right-click menu (as in Figure 9-4).

Figure 9-4: More multiline text formatting options in the right-click menu.
11. Click OK in the Text Formatting toolbar (or press Ctrl+Enter).
The Multiline Text Editor window closes, and AutoCAD adds your text to the drawing.
As you can tell by looking at the Text Formatting toolbar and multiline text right-click menu, the mText command gives you plenty of other options. The Text Formatting toolbar includes a Stack/Unstack button for fractions. The right-click menu includes access to the Indents and Tabs feature, a Find and Replace utility, tools for changing between lower-and uppercase, a special Symbol submenu (including some new symbols in AutoCAD 2005), and an Import Text option for importing text from a TXT (ASCII text) file or RTF (Rich Text Format) file. If you think you may have a use for these additional features, choose Contents>Command Reference>Commands>M Commands>MTEXT in AutoCAD’s online help.
AutoCAD 2005 adds two more options to the multiline text right-click menu: Insert Field and Background Mask.
When you turn on background masking, AutoCAD hides the portions of any objects that lie underneath the text. Use these steps to turn on and control this feature:
1. Right-click in the Multiline Text Editor window and choose Background Mask from the context menu.
2. Click the Use Background Mask check box so that this option is turned on.
3. Either click Use Background (to make the mask the same color as the drawing area’s background color) or choose a color from the drop-down list (to make the text appear in a solid rectangle of the specified color).
4. Click OK to return to the Multiline Text Editor window.
If you’ve turned on background masking but it isn’t having the desired effect, use the DRaworder or TEXTTOFRONT command to move text “on top of” other objects.
Insert Field creates a text field that updates automatically every time you open, save, plot, or regenerate the drawing. These fields can contain data such as the date, filename, or author. Fields draw information from the operating system settings, Drawing Properties dialog box, sheet sets feature, and AutoCAD system variables (see Chapter 2). Use the following procedure to add a field while you’re creating mtext:
1. Right-click in the Multiline Text Editor window and choose Insert Field from the context menu.
2. Choose a Field Name in the left column.
3. Choose a Format in the right column, or, for date fields, type a format in the Date Format box.
4. Click OK.
AutoCAD adds the field to the mText object that you’re creating or editing.
If you see four dashes instead of a valid field value, you probably need to do one of the following things:
? Regenerate the drawing (see Chapter 7).
? Save the drawing.
? Fill in Drawing Properties dialog box values (see Chapter 3) and then regenerate the drawing.
? Configure sheet sets (see Chapter 14).
Figure 9-5 shows fields and background masking in action.

Figure 9-5: mText plays the field and dons a mask.
Another advantage of mText is that it supports tabs and indents. This feature is especially useful for creating hanging indents — the kind of indents that push an entire paragraph to the right of a number or bullet, as shown in Figure 9-5. (Before AutoCAD 2004, there was no straightforward way to perform this feat.) The procedure isn’t as straightforward as in most word processing programs, but at least you
1. Follow Steps 1 through 8 in the preceding section, “Making it with mText.”
2. In the tab and indent ruler, drag the lower slider (the triangle pointing up) to the right a small distance.
The lower slider controls the indentation of the second and subsequent lines in each paragraph. (The upper slider controls the indentation of the first line in each paragraph.) An indent of two to four of the short, vertical tick marks usually works well.
3. Click in the ruler just above the lower slider.
A small
Make sure that the corner of the
4. Type a number followed by a period or parenthesis (for example, 1.) or a