# 3.2 Non-Required proc configuration
#
#echo '1' > /proc/sys/net/ipv4/conf/all/rp_filter
#echo '1' > /proc/sys/net/ipv4/conf/all/proxy_arp
#echo '1' > /proc/sys/net/ipv4/ip_dynaddr
################################################################## #########
#
# 4. rules set up.
#
######
# 4.1 Filter table
#
#
# 4.1.1 Set policies
#
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -P FORWARD DROP
#
# 4.1.2 Create userspecified chains
#
#
# Create chain for bad tcp packets
#
$IPTABLES -N bad_tcp_packets
#
# Create separate chains for ICMP, TCP and UDP to traverse
#
$IPTABLES -N allowed
$IPTABLES -N tcp_packets
$IPTABLES -N udp_packets
$IPTABLES -N icmp_packets
#
# 4.1.3 Create content in userspecified chains
#
#
# bad_tcp_packets chain
#
$IPTABLES -A bad_tcp_packets -p tcp –tcp-flags SYN,ACK SYN,ACK
–m state –state NEW -j REJECT –reject-with tcp-reset
$IPTABLES -A bad_tcp_packets -p tcp ! –syn -m state –state NEW -j LOG
–log-prefix «New not syn:»
$IPTABLES -A bad_tcp_packets -p tcp ! –syn -m state –state NEW -j DROP
#
# allowed chain
#
$IPTABLES -A allowed -p TCP –syn -j ACCEPT
$IPTABLES -A allowed -p TCP -m state –state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A allowed -p TCP -j DROP
#
# TCP rules
#
$IPTABLES -A tcp_packets -p TCP -s 0/0 –dport 21 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 –dport 22 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 –dport 80 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 –dport 113 -j allowed
#
# UDP ports
#
$IPTABLES -A udp_packets -p UDP -s 0/0 –source-port 53 -j ACCEPT
if [ $DHCP == «yes» ] ; then
$IPTABLES -A udp_packets -p UDP -s $DHCP_SERVER –sport 67
–dport 68 -j ACCEPT
fi
#$IPTABLES -A udp_packets -p UDP -s 0/0 –source-port 53 -j ACCEPT
#$IPTABLES -A udp_packets -p UDP -s 0/0 –source-port 123 -j ACCEPT
$IPTABLES -A udp_packets -p UDP -s 0/0 –source-port 2074 -j ACCEPT
$IPTABLES -A udp_packets -p UDP -s 0/0 –source-port 4000 -j ACCEPT
#
# In Microsoft Networks you will be swamped by broadcasts. These lines
# will prevent them from showing up in the logs.
#
#$IPTABLES -A udp_packets -p UDP -i $INET_IFACE
#–destination-port 135:139 -j DROP
#
# If we get DHCP requests from the Outside of our network, our logs will
# be swamped as well. This rule will block them from getting logged.
#
#$IPTABLES -A udp_packets -p UDP -i $INET_IFACE -d 255.255.255.255
#–destination-port 67:68 -j DROP
#
# ICMP rules
#
$IPTABLES -A icmp_packets -p ICMP -s 0/0 –icmp-type 8 -j ACCEPT
$IPTABLES -A icmp_packets -p ICMP -s 0/0 –icmp-type 11 -j ACCEPT
#
# 4.1.4 INPUT chain
#
#
# Bad TCP packets we don't want.
#
$IPTABLES -A INPUT -p tcp -j bad_tcp_packets
#
# Rules for special networks not part of the Internet
#
$IPTABLES -A INPUT -p ALL -i $LAN_IFACE -s $LAN_IP_RANGE -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -j ACCEPT
